#1 Water Heater Repair Company in St. George, UT, with Over 300 5-Star Reviews
For the most reliable water heater repair in St. George, UT, and the surrounding areas, call Iron Mountain Plumbing at 435-412-8391 today!
Your home should be a place of comfort, relaxation, and safety. Your appliances exist to make life easier, faster, and more convenient. If your water heater isn’t working correctly, it can considerably hinder your daily routine.
Without your water heater, your showers, dishwashers, and washing machines won’t work as you need them to. Keeping your water heater functioning properly with routine maintenance means you don’t have to worry about the dangers of a gas leak or an exploding hot water tank. Having a trained professional service your water heater will keep you and your family clean and safe while saving you money.
Iron Mountain Plumbing proudly serves Iron County with unmatched dedication, efficiency, and professionalism. If you’re looking for water heater servicing, repair, or replacement, call us today.
Have questions? Fill out the form below and a member of our team will get back to you as soon as possible.
Water Heater Repair Service in Iron County, UT
In the average household, each occupant goes through as much as 100 gallons of water daily. This is irrefutable proof that we rely heavily on our home’s water supply. If you’re working with an outdated or underperforming water heater, you’re likely costing yourself a significant amount of money.
A water heater is an appliance connected to a home’s plumbing that many people disregard until they try to shower or wash something and there’s no hot water. Most homeowners don’t even think about their water heaters until they don’t work, resulting in expensive repairs or even a full replacement. You may hear your water heater making a strange noise that indicates there’s a problem, but you put off having it serviced because it still functions as it should.
You may think you’re saving money by putting off water heater repair service, but you’re only allowing the problem to worsen and get more expensive to remedy. Repairing a water heater is far less costly than replacing one, so it’s crucial to spot and address issues as they arise. Some signs your water heater needs repair are:
- Rusty water coming from your shower or faucets
- Water is pooling near the water heater
- The water heater is rumbling
- You run out of hot water quicker than usual
- The water heater makes a banging noise
- It takes noticeably longer to heat water
If your water heater is showing any of these signs, it’s time to take advantage of our water heater services before it gets out of hand. At Iron Mountain Plumbing, our well-trained, licensed, and certified team can handle all water heater issues. Don’t let your water heater drain your savings–let us get your water heater up and running today.
Hot Water Heater Repair: How Long Does a Water Heater Last?
The typical tank water heater has an average lifespan of 8 to 12 years. When your water heater reaches this age bracket, the heater will begin to require repairs. Procrastinating on repairs can result in water leakage and damage to your property. Other problems with malfunctioning water heaters can put the occupants of your home in danger, so don’t hesitate when it comes to water heater repair.
The Dangers of a Malfunctioning Water Heater
A faulty water heater can be hazardous and unpredictable. The dangers of a malfunctioning water heater are:
- Gas leaks: Conventional water heaters use gas to create heat. If the valve is leaking gas, there is a high risk of fire or asphyxiation.
- Fire: Your water heater may have a pilot light that can cause a fire if it’s not operating correctly.
- Serious burns: If there is a leak in the heater, the hot water can scald someone in your home.
- Electric shock: Electric water heaters that don’t get proper maintenance can electrocute someone if wires or other components have substantial wear.
- Explosion: Tank water heaters have a safety feature that detects when there’s too much pressure–if the pressure relief valve is faulty, the tank could explode.
To keep you and your family safe, be sure to check your water heater periodically and look for signs of trouble. If you suspect your water heater may present a danger to your family, shut it off immediately and call Iron Mountain Plumbing, the leading provider of water heater repair in St. George, UT.
What Type of Water Heater Can Iron Mountain Plumbing Repair?
Iron Mountain Plumbing is a local and family-owned business, and we pride ourselves on the ability to diagnose and remedy any issues with various residential and commercial water heaters. Our trained and experienced technicians can repair or replace any type of water heater, including
Conventional gas water heaters
Electric water heaters
Tankless water heaters
What Is a Tankless Water Heater?
Tankless water heaters are an exciting innovation that’s been growing in popularity over the years. Tankless water heaters eliminate the concern for exploding water tanks, and they are substantially more energy efficient, saving you money every month on your energy bill. They are also smaller than conventional water heaters, which is great for homeowners who want to get the most space out of their utility room.
Traditional water heaters use energy to keep a constant supply of hot water, but tankless water heaters only heat the water when you need it. They work very quickly, so there’s no standing around waiting to take a hot shower. Iron Mountain Plumbing can quickly and expertly repair any issues with your tankless water heater.
If you think it’s time to upgrade to a tankless water heater to save space and money, we also offer tankless water heater installation!
What Does Water Heater Repair Cost?
Water heater repair cost ranges from $150 to $800, depending on parts, labor, and the severity of the problem. To keep your water heater repair cost down, routine maintenance is key. Traditional water heater tanks will build up minerals and sediment over time. This sediment makes it harder for the heater to heat the water and causes corrosion, which creates leaks in the water tank.
To prevent sediment and mineral buildup, flush and clean the water tank once a year. Keeping the tank clean will keep your water heater running properly and at maximum efficiency. Remember, if your water heater isn’t working right, your energy bills will start climbing.
Frequently Asked Questions
Installing a new water heater costs somewhere between $900 and $3,500. The price depends on the type of water heater you’re purchasing and what local building codes require. Iron Mountain Plumbing will work with you to find an option that fits your needs and budget.
If your water heater produces water that is too hot for you, the heater’s thermostat may be set too high, or it is malfunctioning.
Water Heater Repair Near Me
If you’re in Iron County and you’ve been searching online for “water heater repair near me,” Iron Mountain Plumbing is your best bet. Our water heater repair experts in St. George, UT, will help you get your showers hot and your cleaning appliances running again. Call us anytime, day or night, at (435) 412-8391 for any questions you may have.