#1 Water Heater Replacement Company in Enoch, UT, with over 300 5-Star Reviews
When you need a water heater replacement in Enoch, UT, turn to Iron Mountain Plumbing. We install top-of-the-line water heaters at affordable prices.
Contact Form
Have questions? Fill out the form below and a member of our team will get back to you as soon as possible.
See Our Privacy Policy
How to Tell When You Need a New Water Heater
If you’re not using more water than usual, a high water bill likely means your water heater is leaking or has lost efficiency. Either way, you will need a water heater replacement in Enoch, UT, to fix the issues.
Even a low-quality water heater can adequately warm your home’s water supply. If your water heater sends out cold or lukewarm water, you need to replace it.
Wear and tear lead to rust forming on water heater tanks. If you don’t address that issue quickly, the rust will seep into the water. Once the rust contaminates your water, your plumbing appliances will receive a hazardous water supply.
Some water heater leaks are easy to repair, but most are signs that your device is on its last legs. Rather than undergoing repeated repairs, schedule a water heater replacement in Cedar City, UT when you notice a crack or leak.
Should You Repair or Replace Your Water Heater?
If you’re unsure whether you need a water heater repair or replacement, consider the following factors.
Most water heaters, especially the bare-bones models, last ten years before wear and tear become issues. After ten years, their efficiency plummets.
If your water heater is less than a decade old and only needs occasional repairs, you probably don’t need a water heater replacement in Enoch, UT.
No matter how old your water heater is, you should replace it if it needs repairs regularly. Repeated breakdowns are a sign that your system has lost its efficiency. These issues will also cost you more in the long run than installing a new device.
Modern water heaters will last an entire decade without needing repairs. You’ll keep money in your pocket after installing them.
If your water heater needs a repair that costs 50% or more of installing a new heater, you’re better off replacing the entire system. Water heaters needing repairs that cost that much likely have other underlying issues.
These issues lower the unit’s efficiency and eventually necessitate more repairs. In these cases, installing a new water heater is far more cost-effective overall.
How to Choose Between the Different Types of Water Heaters
Gas and electricity are the two primary power sources for water heaters. Each comes with unique advantages and disadvantages.
Gas is the classic water heater power source. It’s still more energy efficient than the alternatives, meaning it can knock a chunk out of your energy costs.
However, because of their efficient operation, these popular residential water heaters are typically more expensive than electric ones. Additionally, because they use a flammable heating source, you cannot safely store combustible materials near them.
Electric water heaters have the opposite pros and cons of their gas counterparts. They’re cheaper to install than gas-fueled units but come with higher utility costs. Electric water heaters also have high-efficiency models that exceed the strength of gas ones but cost more to install.
Electric heaters also vary in size, ranging from 28 to 100 storage gallons on average. You can install a separate expansion tank for a higher capacity.
On the other hand, you don’t have to install a water heater with a tank at all. While traditional water heater systems have storage tanks that hold water from your home’s main supply, tankless units pull water from the pool directly. They use heated coils to warm the water as it passes through your pipes.
While traditional water heaters need seconds or minutes to heat your water, a tankless water heater will deliver heated water instantly. As a result, they limit the time you need to run your appliances. Additionally, tankless water heaters use less space since they don’t have a massive storage tank attached.
While tankless water heaters are more advantageous than traditional ones, they also cost more to install. Furthermore, they can only produce between three to four gallons of hot water per minute. In contrast, standard water heaters can easily exceed that volume.
Regardless of which fuel source or tank size you choose for your water heater replacement in Cedar City, UT, you’ll find higher-efficiency models that cut down on utilities. Nonetheless, those systems cost more to install.
Therefore, when selecting a water heater, you must determine whether you value long-term savings or lower initial investment.
Water Heater Installation & Replacement FAQs
The average water heater replacement in Enoch, UT, costs roughly $1,000. The exact price depends on the model and features you want.
Most new water heaters let you adjust your water temperature remotely or automatically change the temperature for you. If you want those luxury benefits, you should spring for a high-end, higher-efficiency replacement.
Iron Mountain Plumbing is a licensed, insured, and locally owned and operated business that puts clients first. We always deliver exceptional service and upfront pricing. Working with us, you’ll know the exact cost of top-tier water heater replacement in Enoch, UT.
Premium Water Heater Installation Near Me in Enoch, UT
The right water heater can significantly lower your utility bills and improve your quality of life. There’s no better place to find a top-tier replacement than Iron Mountain Plumbing. With our unbeatable knowledge, industry-leading equipment, and friendly service, we’re Enoch’s plumbing experts. Call Iron Mountain Plumbing at (435) 412-8251 to schedule a water heater replacement in Enoch, UT.
